1. Roll kneading machine feeding: Turn on the vacuum pump, and when a certain negative pressure is reached, connect the suction tube to suck the material.
2. Use a vacuum pump to evacuate and maintain the vacuum level.
3. Control the running time well. The rolling machine has a dedicated time setting button that can be set according to different needs. Make it highly efficient. Time is set differently from seconds to hours.
4. We can set the rolling time on the bucket control panel, and there will be some intervals during the production of the rolling machine, which can be customized according to different needs. Convenient and simple. The interval time and working time are set separately, with a vertical time control button.
5. Turn the knobs on the control panel to "Run", turn the vacuum pump and inflation knobs to "On", and the machine will start running according to the set mode.
6. After the work is completed, the rolling machine should be stopped by rotating the knob on the control panel to the stop position. If the working time is set, the machine will automatically stop running when the working time is up.
7. The final work of the job is discharging and cleaning. After the pressure inside and outside the drum is balanced, the ancient drum releases the material. After releasing the material, the equipment is cleaned using a cleaning agent mixed with water. Rinse with clean water again.
Mobile website