Inquiry

联系我们
如果您有任何疑问,请立即联系!

Maintenance of vacuum rolling machine

Source: Time:2018-02-04 09:54:01 views:

How to maintain a vacuum rolling machine? Let's take a look below:
    1. Open the bottom valve switch of the vacuum oil-water separator after each work and drain any accumulated water. Clean the vacuum suction material, clean the vacuum oil-water separator, and ensure that the vacuum pipeline is unobstructed.  

    2. The vacuum pump should be stopped once a month to check for oil contamination. If the oil inside the vacuum pump has been contaminated, it should be replaced in a timely manner. Before changing the oil, the pump must run forward without load for 15 minutes. After heating the oil, stop the pump and open the oil plug to drain the dirty oil. Clean the pump with some new oil or cleaning oil and inject new vacuum pump oil. The maintenance and upkeep of the vacuum pump (using 10 # gasoline or engine oil) can be carried out according to the user manual of the vacuum pump.  
    3. Regularly check the oil level of the worm gear reducer. If the oil level is found to be lower than 1/2 of the oil window height, 30 # mechanical oil should be added in a timely manner.
keys: 

Contact Us

Message Contact Us

Contact Information

Shandong Jiaxin Intelligent Equipment Co., Ltd

Mr Li:187-6469-1313

Sell one unit:0536-6322333

Sales Department Two:0536-6170033

Foreign Trade:0536-6196888

After-sales service:0536-6216833

Address: No. 18, Xueguan Road, Mizhou Street, Zhucheng City, Shandong Province

Copyright ©Copyright © Shandong Jiaxin Intelligent Equipment Co., Ltd.

Lu Public Security Bureau Special Registration No. 37078202000617 Lu ICP Registration No. 15011672-2